Measurements of soil vertical displacements arounda concrete footing
This project aimed to determine the potential slip plane that occurred during the concrete footing pullout. For this purpose, 3DSensors (DFOS displacement sensors) were installed around the structure in two planes, and vertical displacements were measured. Thanks to the cutting-edge technology of 3DSensors, an advanced analysis of the interaction between the footing and the surrounding ground were possible without any distortions and reinforcing effect in the ground.
DFOS Sensors Installed: 3DSensor
Project challenges
Benefits of using the DFOS monitoring system
Results of using the DFOS monitoring system
Two layers of 3DSensors were installed, parallel to the edges of the footing at 80 cm and 160 cm above the footing base. The structure was pulled out of the ground through a specially designed stand while strain measurements were taken step-wise with 3DSensors. A designed algorithm for data conversion allowed to direct determination of vertical displacements in both layers around the footing. The figure presents the spatial visualization of example results expressed directly in mm for a chosen load step.
Example results
Recomendations (optional)
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
John Doe
Project partner
