Thermal-shrinkage strains in hardening of expansive concrete
The knowledge of strain development over time is essential for shrinkage-free and expansive concretes. Thus, reliable measurements are of great importance, especially in thin elements. The DFOS-based strain sensors allowed to precisely monitor the shrinkage and expansion strains in time, both in concrete and on the carbon textile reinforcement. Finally, the assessment of the stress transfer was possible by comparison of concrete and textile strain values.
DFOS Sensors Installed: Optical fibre in acrylate coating
Project challenges
Benefits of using the DFOS monitoring system
Results of using the DFOS monitoring system
Investigated concrete slabs were reinforced with a carbon textile grid located in the middle of their depth. In all slab specimens, DFOS strain sensors were glued on the grid and embedded directly in concrete, at a distance of 3 mm from the grid. Strain profiles registered during concrete hardening had different shapes depending on the monitored material and allowed for a very detailed analysis of strain transfer between the concrete and the textile reinforcement.
Example results
Recomendations (optional)
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
John Doe
Project partner
